Displays when you select the CAD Standards > Tags tab in the Options dialog. It lets you to edit/define new or existing tag styles. There are a number of default tag styles defined, all of which can be modified, or, new ones can be added.

Setting	Description
Property	In the Property column click the arrow next to the Tag ID to expand the list of properties to be defined as shown: Note: The Vertical Spacing value can be increased/decreased using the arrow buttons which display in the Value field when you select it. The property values can be defined using the following methods depending on what type of value is required: Type a value directly into the field Select from a drop down list of predefined values. Use the arrow buttons in the Value field to adjust the value in increments. Note: If there are existing CAD text styles defined in the current drawing, they will be available from a drop down list to choose from. If one is selected, the remaining property fields will inherit the properties of the predefined text style.
Value	In the Value column, enter a value for the adjacent Property field using the descriptions above.
Add	Click to add a new line style to the list then define the name and properties for the style.
Delete	Click to delete the selected line style.
OK	Saves the changes and closes the Options dialog.
Cancel	Closes the Options dialog without saving any changes.
Apply	Applies any changes while keeping the Options dialog open.

Multiple Raceway ID settings

By default there are multiple settings for Raceway ID's (RW-ID through RW-ID4). Raceway fittings such as bends, tees, and cross overs are comprised of multiple segments which each get assigned a tag. You can configure the tags for each segment separately.

For Example: A bend uses two segments and thus would apply RW-ID and RW-ID1 tag settings to each respective segment.